“corrosion resistance”造句，怎麼用corrosion resistance造句

New views on "corrosion resistance reverse" of chromium steels and the effect of chromium on seawater corrosion resistance were postulated.

Model 410 - martensite (high-strength chromium steel), good wear resistance, corrosion resistance is poor.

Chromium can improve the steel's quenching and wear resistance, can improve the corrosion resistance and oxidation resistance of steel.

The corrosion resistance of Guangzhou Metro engineering concrete to groundwater was investigated by simulated and accelerated corrosion tests.

They offer good corrosion resistance, with an aluminium body a black oxide finish on the exposed surfaces to resist corrosion.

Nickel iron -- Improved corrosion resistance over gray and ductile iron. Higher temperature corrosion resistance and mechanical properties. Very resistant to oxidizing atmospheres.

The tempered glass container corrosion resistance and stain resistant and abrasion resistance, can be long-term use.

Influence of surface nanocrystallizing process on corrosion resistance of 0Cr18Ni9 stainless steel

Influence of organic additives on the corrosion resistance of aluminum tube with silane coating

Microstructure and hot corrosion resistance of aluminosiliconized layer on nickel-base superalloy K4104

Fused magnesium aluminum spinel has the characteristics of high bulk density, high thermal shock resistance, strong corrosion resistance and slag-resistance.

Results of hardness and corrosion tests show that the aluminum oxide ceramic film is of high hardness and excellent alkaline corrosion resistance.

This product has good corrosion resistance and thermal shock resistance, it is suitable for ceramic industry, electricity industry and boiler industry.

Applicable to all kinds of contact with the atmosphere, sunlight, ozone environment and a variety of fire resistance, chemical corrosion resistance of the seal.

The rough chrome plating is for mating to other chrome plated equipment and for additional corrosion resistance.

This surface has extreme hardness (60 RC. ), excellent wear and corrosion resistance, and low coefficient of friction.

A stainless steel and hard anodized aluminum alloy frame provides exceptional strength, ruggedness, and superior corrosion resistance.

The alternating current impedance was used to examine the corrosion resistance. It is found that laser thermal shock improved the corrosion-resistant of the deeply drawing steel strip with Ni-coating.

The coating consists of epoxy-silicon bond, aluminium powder, glass filler and various additives to improve heat stability and corrosion resistance.

Features: the overall stability and flexibility of the product is good, good corrosion resistance, strong anti erosion ability, with water permeability, low cost of construction and so on.

"Today the most important are the alloy steels, which have a wide range of special properties, including hardness, toughness, corrosion resistance, magnetizability, and workability. "

This paper reviews the corrosion resistance of various dental alloys evaluated in the light of their released ions in experiments, and shows the examples in which original corrosion resistance is lowered by the factors such as casting, polishing and contact with other metals.

The test results showed that addition of La into the pure steel can modify the inclusion and improve the morphology of the inclusion thus to improve the corrosion resistance of the pure steel.

The corrosion resistance of some structural materials, including stainless steel SS304L and carbon steel C20, for the container of the alloy over a long heat storage or release period was studied.

" Chromium： Metallic chemical element, one of the transition elements, chemical symbol Cr, atomic number 24. A hard, steel-gray metal that takes a high polish, it is used in alloys (e.g., ferrochromium, steel, stainless steel) to increase strength and corrosion resistance."

Study on corrosion resistance of 470 vinylester resin in NaOH

High temperature corrosion resistance of pack aluminized SUS316ss steel

Hydrophilie property, corrosion resistance and heat resistance of the membranes on al alloys were tested.

The use of acid-base and humid environment on the corrosion of metal plating layer to test the corrosion resistance.

Corrosion resistance, the surface treatment of the product is amorphous coating, without a grain boundary, so particular corrosion resistance(see Table 1).

Influence of welding and heat treatment processes on corrosion resistance of 0Cr18Ni9Ti stainless steel

It has the advantages of corrosion resistance, erosion resistance and high temperature resistance. It can increase the life of tapping hole.

Acid and alkali resistance, corrosion resistance, no crack, no loss, high stability, no aging problems, and the building wall with life.

"Copper -- among the most important properties of wrot copper materials are their thermal and electrical conductivity, corrosion resistance, wear resistance, and ductility."

Due to the formation of low melting calcium-aluminates the corrosion resistance and hot erosion strength are reduced.

The total quantity of corrosion surface defect is decreased due to the decrease of grain boundary energy with the increase of grain size and the atmospheric corrosion resistance is increased.

An approach to the cavitation corrosion resistance of a cast high strength titanium alloy is made by using various testing methods.

Zinc alloy coatings can be obtained from suitable range of bath, and it has attracted a great attention due to their unique high corrosion resistance, low hydrogen brittleness and chemical stability.

The alloy boasts good shaping property, high corrosion resistance, weldability and fatigue strength, medium static strength, is used to make airplane oil tank, oil pipe, oil pipe, metal sheet and instrument for vehicle and vessel, street lamp post and riveted wire.

Conductor: fine strands of tinned copper wire, exellent corrosion resistance.

The advantage is weaving science, wear resistance, aging resistance, corrosion resistance, anti-exposure, low flexibility, high safety factor.

Nickel has a high corrosion resistance to acid and alkali, rust and heat resistance at high temperature.

Aluminum can improve the strength, hardness and brass corrosion resistance, but make plastic reduce, suitable for liner condensing tubes and other corrosion resistant parts.

The silicon carbide has the advantages of excellent corrosion resistance, high coefficient of heat conductivity, self-lubricity, small expansion.

The point which can be made, however, is that the added flexibility offered by composites, together with the inherent advantages of light weight, corrosion resistance, etc.

The manufactured techniques of burned Magnesite chrome bricks are the same as magnesite bricks, with low porosity, high strengty and refractoriness under load, Their slag corrosion resistance and high temperature strengty are also better than other magnesite chrome brick.

Superior corrosion resistance, no corrosion in acids、alkali and aqua regia.

Gray iron has corrosion resistance that is improved over steel in certain environments.

The special valve in the petroleum exploitation requires excellent corrosion resistance, so the valve wall must be cladded with the highly corrosion resistant material during the production of valve.

Copper-zinc alloys--Determination of dezincification corrosion resistance

This hard and brittle magnet has the features of powerful magnetism, good temperature stability, good resistance to demagnetization, good corrosion resistance.

The corrosion-resistant characters, experiment methods of corrosion, and the class of corrosion resistance and its evaluation methods of highmolecular materials are studied.

Guiding type two-position& two-port high-temperature solenoid valve adopts teflon hard seal structure, with reliable performance, large flow, high-temperature resistance, and corrosion resistance. It can control multiple fluid, with easy operation.