“cast iron”造句，怎麼用cast iron造句

Made of cast iron.

a skillet made of cast iron.

Marine bronze and cast iron flanged cocks

Marine cast iron flanged lift check valves

breaking mill for cast iron scrap or pig-iron

Study of the fracture toughness of ductile cast iron (DCI) and malleable cast iron (MCI)

I was founded in 1994, is a specialized in cast iron, cast steel, alloy cast iron, ductile iron casting processing units.

Malleable cast iron pipe fittings--Type size--Reducing crosses

The lathe bed is made of cast iron.

Abrasion-resistant capability of Ni-cast iron and Cr-cast iron were studied by abrasion wears and impact test.

Sand and rusts removing of largesized cast iron,cast steel,steel surface treatment of oxidized workpieces.

"Sprocket rim made from cast iron, chain guide is malleable iron."

The abrasive resistance of as-cast martensitic high chromium cast iron is 3 times more than that of Ni-hard cast iron.

Iron nickel high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron such as cylinder cap.

Cooking food in cast iron skillets can increase the iron content of foods, and consuming Vitamin C-rich foods along with iron-rich foods can improve iron absorption.

The results also find that wear resistance of niobium cast iron oil ring is 87.3% higher than that of CrMoCu alloy cast iron along with the cost reduction for niobium cast iron oil ring.

A cylinder head of 4000Hp diesel engine installed in locomotive has been cast successfully with this cast iron.

Main products include cast iron shots. cast steel shots, steel wire cut shots and stainless steel shots etc.

Application: Drilling deep hole in non alloy steel, alloy steel, grey cast iron, malleable cast iron, special aluminum or magnesium alloy.

For cast materials, grey cast iron, synthetic materials, itanium and titanium alloys, non-iron metals and also high temperature resistant steels as well as for woodworking purposes.

In Ductile Iron spheroidal nodules also eliminate the crack effect of flake graphite which is exhibited in cast iron.

The gates of the iron birch trees covered with iron, cast iron latches, are a foot thick and two feet wide.

Research on optimization of cutter parameter and cutting specifications to high-chromium cast iron machining

不必畏懼，昂頭走過去就是了。

This machine has two types of frame- cast iron and stainless steel.

Rugged one-piece body including flanges. Cast in stainless steel to eliminate corrosion problems that are found with cast iron, or steel valves lined with stainless steel.

The effect of multi element alloying on the microstructure and properties as cast of high chromium white cast iron has been studed.

The results showed that the lanthanum rare earth alloy could be used as a new type of modifying agent for high-strength gray iron and vermicular cast iron.

T-slot platform in the process of production, will produce a part of the theory of weight deviation, note whether the cast iron flat cast iron plate on the impact of the deviation is used.

Mobile jaw drip-forged with high quality carbon steel, inactivate treatment, malleable cast iron handle and drip.

Therefore, the vanadium content in high chromium cast iron used for metallurgical spare parts is seriously controlled.

Compared with the chromizing layer, the chromosiliconizing layer on cast iron is more unifomrm and more compact.

The handrail of this crutch, inlaid with a round and bright cast iron, is a heavy burden for an old man over seventy to walk with it.

"Motor stator housing is one integral casting, There are no bolted-on jackets or external seals to corrode, wear or leak. Casting is of heavy cast iron throughout."

Pain permeates my silence, silence cast iron, if my chest, can not withstand all the blows for you, darling, you have to be brave.

Wrought iron has a lower carbon content and contains little slag and impurities. It is soft and not brittle, and can be worked more easily than cast iron. But the production of it is very small.

"In addition to vitreous china fixtures, Eljer offers a complete line of quality plumbing fixtures made of cast iron, steel, and acrylic and a complete line of brass fittings for those fixtures."

Hard nickel cast iron is a kind of good wear resistant material, but its carbide formed as reticulation and microstructure was coarse, resulting in low toughness and unstable properties.

"Valves to be Class 125 manufactured in accordance with MSS-SP70 (gate) or MSS-SP85 (globe/angle), flanged, bolted bonnet, OS&Y, iron body, bronze trimmed, with body and bonnet conforming to ASTM A 126 class B cast iron. Packing and gaskets to be non-asbestos."

Smithing cast iron. Nodular cast iron.

Smithing cast iron.

Marine oval-shaped cast iron and cast steel pipe flanges

Marine cast iron flanged stop check valves

Fine, with local cast iron railings, wrought iron casting.

The cast iron was melted and poured into sand moulds.

Malleable cast iron pipe fittings--Type size--Backnuts

the iron carbide constituent of steel and cast iron; very hard and brittle.

Because malleable iron is obtained by heat treatment of white cast iron there are certain relations between the structure of white cast iron and its heat treatment.

Ferrous metals include iron and alloys of at least 50% iron, such as cast iron, wrought iron, steel, and stainless steel.

The coating sand for cast iron and cast steel and collapsible coating sand for nonferrous alloy casting are also described.

Long Xingsi original cast iron tower, he encountered a big problem: the cast iron tower to the sixth floor, but in any case not a Recast.

Cook in cast iron pans - the acid in some foods (like tomatoes) "pulls" the iron from the pan.

Malleable cast iron pipe fittings--Type size--U-Elbows(return bends)

Based on the ordinary high chromium cast iron foundation, designed one kind of high alloy abrasion-resisting cast iron material which is used to make the lining iron of the screw grader.

The properties and application of the D-type graphite cast iron camshafts made with V and ti containing pig iron was also described.

The effect of rare earth elements on carbide of high Cr cast iron was investigated and the continuous cooling transformation( CCT) curves of high Cr cast iron containing and not containing RE addition were determined.

The duplex melting process by Blast and Medium-Frequency Induction Furnaces for cast iron production has been studied.

This article introduces a kind of equipment, which removes the adhering sand between the thin walls and in the furrows of cast iron parts without damages.

The piece consists of three wrought-iron arms, each cut into a silhouette of an elk, with hanging green-glass lights that look like gigantic acorns with "hats" of cast iron.

The cast iron pipes have many advantages, such as high strength, good toughness and corrosion resistant. They are used widely for supply draining water and gas transportation in city and industries.

"The Peace Grill serves a perfect combinationg of French Cuisine, which is presented by our French chef. With the dark brown patterned wall, the cast iron carved floor lamp and the famous La Lique wall lamp, the whole Peace Grill presents a noble and elegant atmosphere."

cast iron ingot mould

Pig iron used for spherical graphite cast iron

Marine cast iron flange dual-row stop valves-case

Both steel iron and cast iron have the structures of eutectoid, hypoeutectoid and hypereutectoid.

According to different casting methods, divided into continuous cast iron pipe and the centrifugal cast iron pipe, wherein the centrifugal cast iron pipe is divided into two types of sand and metal.

The gears and gear brackets may be either cast iron or cast steel and may have cast or cut teeth, depending on the loads and the application.

Forming one spindle made cast iron to ensure the accuracy of winding.

On the base of invalidation analysis of the wear liners of the beater, the abrasion-resistant capability experiment is carried through NJ-cast iron and Ct-white iron.

The ceramic-lined steel composite pipes are lighter than alloy pipes, cast iron pipes, and cast stone pipes, which reduces the expense of transportation and makes the pipes easier to install.

Maska is a Canadian manufacturing division of Baldor Electric Co USA. Maska was founded in 1964 and is a manufacture of cast iron pulleys and related power transmission products.

manganiferous white cast iron

Heat resisting nodular malleable cast iron is a new kind of heat resistant cast iron.

Its major products are widely used in metal filtration such as cast steel, cast iron, cast copper, cast aluminium and high-temperature alloys.

"also known as nodular cast iron and spheroidal graphite iron, ductile iron solidifies with free carbon in a spheroidal graphite from."

Effect of microstructure of nodular cast iron on its nitrided layer depth and wear resistance by QPQ process

The influence of rare earth( RE) content on mechanical properties of wear-resistant white cast iron was studied by means of metallographic examination, scanning electron microscopic examination and mechanical property test.

Production of as cast automobile parts of s.g. cast iron with high strength and toughness

Sand and rusts removing of large-sized cast iron,cast steel,steel structures,large-sized forging and surface freatment of oxidized workpieces.

Soft mechanical joint grey cast iron fittings

Almost all of the interior detail is of cast iron or plaster; the use of wood was minimized to insure fire safety.

Considering the use of cast iron plate (cast iron platform) local wear and tear of the plate after the inhomogeneity of the local error control, more necessary.