“oil seal”造句，怎麼用oil seal造句

steering knuckle case oil seal retainer

Skeleton type can be divided according to package seal, and seal the exposed skeleton oil seal assembly.

Replace the oil seal in the timing case cover.

Research of front oil seal cover of engine for SVW and FVW.

Imported axletree and framework oil seal assures the liability of rotary precision and airproof, and reduces the rate of troubles.

For example, the main driving axle reducer seal assembly technical requirements: input flange oil seal centerline hole of the center line of the small eccentricity of more than 0.1mm.

The main products are soft shaft, barrows, engine stents, pipes, the rubber sealing strip, oil seal, high subsection, stamping the and so on.

Guangzhou Qi-chang company with NOK 20 years history of cooperation, specializing in a variety of motorcycle oil seal, seals, ordered machinery and equipment seals.

In addition, an imagination of using the reverse setting of oil seal to produce the microleakage inord er to make clean the lip contact region using in the agricultural construction Mach...

drive pinion oil seal

Install new front crankshaft oil seal.

Remove and discard the front crankshaft oil seal.

Install the new upper rear bearing oil seal with the white paint facing towards the rear of the engine.

The drawing cylinder of C7620 is very difficult to assemble and disassemble; the oil seal of the drawing cylinder is easy to wear down faster and causes leakage.

After a long time, the main oil seal can be deformed; sealing effects can be reduced, and sealing functions can be even lost.

oil-proof a. oil seal oil-tight radial selector

If the leakage occurs at the rear oil seal area, refer to the section, Inspection for Rear Seal Area Leak.

The final drives are double reduction with spur gear and segment sprocket, which are sealed by floating oil seal for easy service.

Form of the structure can be divided into single-lip oil seal and oil seal lips.

Install rear oil seal.

Load type bearing and oil seal device, and a sound proof clapboard, can effectively prevent the vibration and noise, ensures the processing object is not polluted by oil.