“cylinder block”造句，怎麼用cylinder block造句

The features of cylinder block and cylinder head core assembly vertical casting process are introduced.

The mechanism consists of several parts like the crankcase, cylinder block, pistons, connecting rod, crankshaft, etc.

Dial gauge with universal dial gauge bracket must be screwed to the cylinder block and placed against the crank arm.

This paper the cause of the scab of the inside surface of cylinder block on condition that the resin sand cores are made in cold core box.

The oil pan and the lower part of the cylinder block together are called the crankcase; they enclose, or encase, the crankshaft.

Remove the crankshaft from the cylinder block (refer to Cylinder Block Disassemble).

Remove the water pump from the cylinder block.

This is fitted in the cylinder block and is driven by the chain drive.

Using furan sand to produce heavy diesel engine block and crankshaft eliminated defects of castings including “penetration/burn-in”,“shrinkage porosity”,“big dimension deviation” of cylinder block,“penetration/bum-in”,“misrun”and“run-out”of crankshaft,and so on.

Remove the engine cylinder head from the cylinder block (refer to cylinder head removal in this section).

The application of quality control spot in foundry reduces the scraps of cylinder block from 45.9% to about 20% of total scraps.

Imported mirror cylinder block cylinder, oil-free lubrication, friction coefficient, corrosion-resistant, with superior durability and reliability.

Position the cylinder heads onto head gaskets and cylinder block.