“finite element analysis”造句，怎麼用finite element analysis造句

Properties of finite element analysis and its application to textile industry were discussed. Finite element analysis will broaden the research methods of textile science.

Elliptical track design of uniform speed gimbal and finite element analysis of starry case

3-Dimensional finite element analysis of Xijian River Bridge on Guangzhou-Zhuhai intercity rapid rail transit

Objective To establish a three dimensional finite element model of proximal femur of normal person as a foundation of finite element analysis in this area.

Analysis of reflection cracks of asphalt concrete overlay over used cement concrete pavements by finite element analysis

Combining APDL in ANSYS with VC, the parameterized finite element analysis system of the hydraulic gate hoist structure is developed.

Objeclive:To establish a two dimensional finite element analysis model for hard tissue morphology on lateral cephalometric X ray film.

The paper introduced an approach of finite element analysis of object-oriented light steelwork based on AutoCAD.

Let the finite element analysis method be introduced into the CAD of carbide end mill, and carry out an analysis on the strength and rigidity of the cutter.

With the results of the multi-ribbed wall tests and finite element analysis, the shear capacity formulas of a oblique section based on ultimate balance theory are given.

A sandwich type plate with metal facings and felt core fastened by some bolts was studied by using both the test and the finite element analysis.

According to the finite element analysis result for the square silicon cup, the performances of the force sensors have been calculated.

The proposed criterion is used to evaluate plastic loads in pressure vessel design by analysis using elastic-plastic finite element analysis to guard gross plastic deformation of pressure vessel.

The method was discussed for how to integrate optimizing and building model with finite element analysis on 3D development and analysis of outer-tooth gear pump through UG design platform.

By the use of taking the quench tower of domestic some large ethylene unit as an example, the finite element analysis on steam outlet pipe of tower top was conducted.

In this paper, a structural-acoustic model of a model tractor cab for finite element analysis was established, and the acoustic modal and the coupled structural-acoustic modal were analyzed.

The objective of constructing finite-elemental modal, carrying out finite element analysis on a certain motorcycle vehicle frames intension with FEA software ANSYS, is to provide some reasons for the disjunction of the motorcycle frame and useful parameters for vehicle design and optimum.

Nonlinear finite element analysis on the local thinned elbow

Effects of geometrical stiffness on foundation settlement by finite-strain finite element analysis

A finite element analysis of headframe intensity of 40-ton workover rig;

Nonlinear finite element analysis of AC transmission lines based on insulator rupture

An intensity analysis was carried out to the friction weld area of turbocharger shaft with ANSYS finite element analysis software.

By finite element analysis of circular conical shell, the natural frequencies and vibrational modes of Yongle Bell have been calculated.

The analysis result shows that it is a very feasible method for designing of nonstandard parts to adopt optimal technology based on finite element analysis.

For studying the deformation of flexible protection system accurately under the given impact, finite element analysis and performance test are carried out.

Possibility and efficiency in the application of this method to large finite element analysis are illustrated by an example of the stress analysis for a section of a cable stayed bridge.

We ran finite element analysis stress calculations to determine where the frame needed to be reinforced for maximum strength and stiffness, then reinforced those areas with additional carbon fiber.

Combining Qiapuqihai hydro project in Xijiang, this thesis uses the method of 3D finite element analysis to carry on the entirety 3D stress analysis for flooK wind shield^ abamurusof the layer of generator ,and spiral-case and the structure of its peripheral concrete .

Isoparametric element of arbitrary hexahedron plays an important role in finite element analysis.

The parametric finite element model of the television with packaging structure was established and its dropping simulation was achieved using the finite element analysis software ANSYS/LS-DYNA.

The structure coordination and shear unlocking middle thick plate element is a problem to which people pay close attention in the finite element analysis of plate.

Using the ANSYS finite element analysis software, thermal analysis and thermal stress analysis of side dam in the strip casting process are carried out to explain the cause of side dam cracking.

The temperature field and warming process of the transient and steady state in the laser rod by symmetrical trigonal side-pumping were simulated using the finite element analysis method.

Viscoelasticity finite element analysis of interface bonding behaviors of asphalt pavement

With the help of ANSYS finite element analysis software, the acoustic pressure response cavity of a homemade passenger car with acoustic fluid -structural coupling has been studied.

Improvement of finite element analysis of unstable saturated-unsaturated seepage

Based on the universal finite element analysis software ANSYS, a spatial model of the bridge is built and the stress distribution under the live load on main sections is analyzed.

A 3-d static and dynamic linear elastic and nonlinear finite element analysis is made on Guandi Gravity Dam.