“wire harness”造句，怎么用wire harness造句

5、Disengage the blower motor wire harness from the wire harness retainer.

7、Install the blower motor wire harness into the wire harness retainer.

9、Engage the heater-A/C wire harness connector and blower motor relay wire harness connector push-in retainers with their mounting holes in the heater-A/C housing.

11、Move the BCM towards the steering column far enough to access the three wire harness connectors.

13、Disconnect plug connection for bonnet wire harness in plenum panel on right.

15、Unplug the push button module wire harness connector from the trip computer, compass, and thermometer display module.

17、Lower the speaker from the headliner far enough to access and unplug the speaker wire harness connector.

19、These products are unique for general testing, for high current, for high frequency, for wire harness as well as for BGA testing.

21、Unplug the wire harness connectors from the washer pumps and the washer fluid level sensor, if the vehicle is so equippe

2、Connect all lamp wire harness connectors.

4、Unplug the power mirror wire harness connector.

8、Unplug the wire harness connector from the switch.

12、Plug the wire harness connector into the back of the heater-A/C control.

16、As reference SIEMENS is our greatest customer We are a custom cable assembly and wire harness manufacturer in Turkey.

20、Our main products are rubber auto parts, such as shock absorber for chassis, bumper block, sealing, accessory body parts, wire harness, ignition coil and others rubber parts.

3、Install wire harness for electrically adjustable seats.

10、Lower the overhead console far enough to access the two wire harness connectors.

18、Thread wire harness through the openings at the rear lid and press the rubber sleeves cleanly onto the rear spoiler.

6、Plug the in-vehicle temperature sensor wire harness connector into the instrument panel wire harness.

1、Disconnect retractor wire harness connector.

14、Unplug the wire harness connector from the low pressure cycling clutch switch on the top of the accumulator.