“clamps”造句，怎麼用clamps造句

The deploy and retract hydraulic tubing are located by tubing clamps mounted on the torque box.

The meat clamps inside the seam is red, certainly must attentively look after oh!

Only the modern technology of clamps and sharp scissors permits the slithery tube to be dealt with at speed.

Meanwhile the pipe is also matched with tee joint for gas distribution and elbow pipes as well as steel clamps, which have been proven for 20 - year use.

Fixing clamps are a form of structural design in which the item is fixed in a certain position to avoid displacement.

Just because in my bone also clamps is gripping such factor, therefore I saw these encourage the life only then can have such sympathetic chord.

If gas is detected the driller immediately lowers the drill pipe as low as possible and clamps it with the blowout preventor pipe RAMS stopping fluid loss from the well.

Clamps is through manual clamps, clamps by four clamps realizations, like this can very good prevent clamps under the action of force the work piece to have the deformation.

EU clamps down on heavy metal cadmium in batteries.

Secure all work with clamps or a vise, freeing both hands to operate tools.

Tighten the clamps slowly to allow any excess glue to escape and leave the joint clamped until the glue sets.

The processing measure was introduccd by the impact drilling filling pile construction craft and broken pile and the pile body clamps the putty.

When jigs and fixtures are designed, the clamping system is designed to ensure that the correct clamping force is applied, and that the clamps can be operated quickly but with safety.

I will add more jumpers and clamps if I were to keep this system hooked up.

Pipe clamps, which are made from clamp fixtures and standard black pipe, are necessary for panel, face frame and general furniture assembly.

I'll need some lap pads, forceps , metzenbaums and satinsky clamps.

Then gently tap the dowels into the holes (Photo 4). Next, align the mating board so the exposed dowels meet their corresponding holes (Photo 5) and use clamps to pull the joint tight.

Canon, Nikon, Pentax, Olympus and Sony are providing the battery clamps to suit their digital SLR cameras.