“worm gear”造句，怎麼用worm gear造句

The spirally threaded shaft of a worm gear.

Drawing three-dimensional model of skew gear,sevel gear and worm gear on CAXA three-dimensional electron board of drawing;

Research on digital design system for plane double-enveloping worm gear

This machine tool use hobbing cutter adopt continuous cent tooth means roll cut, cans process straight teeth and a garden of stud gear or worm gear。

On the other hand, when the feed rod is used, it supplies power to the apron through a worm gear.

Main causes of throwing turret are: friction torque of friction clutch of turret traversing mechanism is not enough, and worm gear and worm of traversing mechanism are not self-locking.

Also this method can be used to optimize the parameters of modified worm gear drive and analyse the contact condition under errors.

There are built with a worm gear drive which has proven to be kinematically ideal for fast bi-directional rotation, Rotary axis is driven with gears via Servo motors.

Accuracy of double enveloping worm gearing with straight line generatrix

Transmission mainly worm, worm gears, no excessive noise when used, and there is sufficient amount of lubricant oil can get a good lubrication, and increase machine life.

It is mainly made up of cross section worm gear_spring_slanting lumps_ball.

under-type worm gear

Many worm gears have an interesting property that no other gear set has: the worm can easily turn the gear, but the gear cannot turn the worm.

Feasibility argumentation of 1580 thermal rolling worm gear reducer being applied in baosteel group corp

Operator is a self locking worm gear type. Equipped with adjustable stops at open and shut positions.

For the worm gear set, a mathematical model is set up, basic equations are derived, and tooth contact analysis is carried out.

With cut to enter to' s transmission system in this machine tool, if changes tangential tool behind, can as coning hobbing cutter or flying cutter adopt cut to enter to style process worm gear。

A new rolling type of spherical enveloping worm gearing with point meshing is proposed.

A gear sector is meshed with the worm gear; rotation of the worm gear causes the gear sector to rotate.

Thus it can been seen that, after mending tooth shape of the worm, the Wildhaber-worm gear pair sensitivity to errors has been greatly reduced.

Joined to the numerical control index head to be allowed to process the machine parts as the gear, the worm gear, and so on, also has the higher processing precision.

globoidal worm gear

Check for scores, nicks or burrs on the rack piston finished surfacSlight wear is normal on the worm gear surfaces.

Particularly suited for worm gear lubrication, and can be used as multipurpose gear lubricants.

Planar double-enveloping worm gears reducer-dimensions and load capacity