“weld”造句，怎么用weld造句

But if you find these flaws you then, the solution is grind it out and weld overlay, take different weld and weld overlay so that you can avoid the leak that may occur.

CO2 gas shielded arc welding is widely used in production, but the spatter produced in the weld process badly affects the quality of weld.

Operate machines or equipment which weld, solder, bolt, screw or rivet metal parts together.

When post weld heat treatment is required, the PWHT may be performed by using an approved subcontractor.

Quick: Don't need to weld and galvanize, the setting time is 3 times quicker than the flange connect fitting.

Pre-cleaning should include the removal of metal filings and weld splatter: both are potential sources for dirt in phosphate and electrocoat.

According to the characteristic of robotic arc welding inverter, two kinds of electronic reactances are designed to improve the spatter and weld appearance in the process of robotic CO_2 welding.

Standard weld is autogenous weld across end (A.W.A.E.). Sanded after weld.

It can occur in any part of the weld.

Weld spatter consists of particles of metal unintentionally ejected from the molten pool during welding and deposited on the surface of base or weld metal.

A: Can you spot weld a tube to a sheet metal?

Renqiu it is inferior to weld apparatus factory lie in North China pearl Baiyang Lake one side for city to loose, easily accessible, the geographical position is superior.

A robot may consist of one arm that can spot weld automobile frames; or it might be a pack mule that can carry heavy gear over difficult terrain. 4.

In extreme instances, the contacts may weld together.

Burrs, slivers, scabs and weld spatter visible following blasting shall be removed and the area re-blasted.

His job is to weld parts together.

Resistance to weld splatter has made it suitable for car manufacturers who specify Speedy Rail for lift-and-carry transfer lines for car body panel welding.

Surface imperfections, such as slivers, scabs, burrs, weld splatter, and gouges, shall be removed by grinding.